Need Help? Call Toll FREE
1-888-822 3336
live chat service provider
getMedOnline Archive Page
Saturday, April 28, 2012

Summit Non-Display Fetal Doppler
The most precious thing to every mother is her children. Even before they are born a mother worries constantly that her baby is ok, healthy, and happy. Fetal dopplers can provide assurance that the baby is healthy and prospering as they should be. They are a non-invasive way to monitor the baby's heart beat which can be an extremely effective way to monitor baby's health while still inside the womb.

Fetal dopplers are the most commonly used type of heart beat monitor. Other methods of monitoring pose a risk to the baby. There is no risk with a doppler because it is used outside the womb only. There is no discomfort and the doppler is very easy to use. They are so easy to use that the hand held fetal doppler can be purchased inexpensively for home use as well. It can be used at home anytime you need to check on baby, especially if the pregnancy is high-risk. It is worth the peace of mind it can bring.

Sound from inside the womb is sent through ultrasonic waves which are picked up by the hand held fetal doppler and transmitted through a speaker on the doppler. A special gel is placed on the mother's abdomen which keeps static and any noise from outside the womb to a minimum. The gel also helps to protect the end of the doppler. The probe is moved around the abdomen until the heart beat is found and a heart rate can be calculated. The average range for a fetus heart rate is 120 to 180 beats per minute. As the baby moves the heart rate will increase. When the baby is sleeping the heart rate will be slow. The range is so wide for normal that it will take a few visits to determine what is normal for your baby. By determining the normal heart rate of your particular baby, it can be used to monitor the baby's health more accurately. If your baby is normally on the high end of the range and is all of the sudden on the low range (or vice versa) it could be an indicator there is a problem.

The probes of a hand held fetal doppler come in 2 MHz and 3 MHz. 3 MHz probes are more effective for the majority of pregnant women. Occasionally if the mother is very obese the 2 MHz probe may work best. The higher frequency probe has a shorter wavelength which may not reach the fetus in a very overweight woman. Fetal dopplers are very helpful and are an important monitor used in pregnancy.

by: getMedOnline 0 Comments

Friday, April 27, 2012

Liquid Nitrogen Container Safety Instructions

Liquid Nitrogen (LN2) is widely used in manufacturing plants, medical facilities, restaurants and on farms and ranches. A little care and common sense are required in the safe handling of liquid nitrogen (LN2) and liquid nitrogen storage tanks.
LN2 is extremely cold at -195°C (-320°F). When it vaporizes it produces a large amount of very cold gas. These two properties have the ability to cause personal injury or property damage. Do not allow anything cooled in liquid nitrogen to come in contact with your bare skin because it is so cold your skin freezes to it instantaneously. Anything cooled in liquid nitrogen will freeze to the skin and pull the skin off when you try to yank the object away. Heavy leather or insulated gloves and goggles (not safety glasses) must be worn when working with liquid nitrogen. Always use tongs or forceps to remove straws or canes from the storage tank. When working with open containers of liquid nitrogen boots should be worn and pants (or a full length apron) should be worn outside the boots to prevent LN2 from getting into your boots.
Do not seal the liquid nitrogen tanks with a tight fitting plug that prevents the venting of nitrogen gas or the pressure build up can cause the tank to explode. Only the original necktube stopper furnished with the tank should be used.

Brymill MVE Liquid Nitrogen LN2 Storage Tanks

Nitrogen gas is odorless, colorless, tasteless ... and it can kill you! LN2 gas is not toxic but it displaces the oxygen in the air and can cause suffocation. That is why liquid nitrogen tanks must always be stored and used only in areas that are fully ventilated. Do not transport tanks in a closed vehicle. Nitrogen gas is extremely cold and your eyes can be damaged by exposure to this gas even when the contact is too brief to freeze the skin. When liquid nitrogen evaporates the cloudy vapor that you see is condensed moisture, not nitrogen gas. The gas itself is invisible.

Store your tank only in a clean, dry, ventilated area. Moisture, caustic cleaners or anything which might cause corrosion should be removed at once. Wash containers with plain water or mild detergent solution and then wipe dry. In addition, tanks should be stored in an upright position to prevent spillage. Tipping them over will cause the liquid nitrogen or nitrogen vapor to pour out and will greatly reduce the tank's holding time. Tanks should be handled with extreme care and caution and never dropped or jarred as this might damage the vacuum system. Large tanks are heavy and cannot be easily and safely carried but the optional roller base provides for safe and easy movement.
DO NOT OVERFILLTHE TANK. Check the liquid nitrogen level in your containers at least weekly and do not allow the liquid nitrogen level in the tank to get lower than 5 inches which is enough to maintain the low temperature necessary to avoid damage to the ampules, canes, straws or vials you have stored in the tank. Use special plastic, solid metal or wooden dipsticks. Never use hollow tubes or pipes as the boiling nitrogen will force LN2 up the tube and into your face. Always wear insulated or heavy leather gloves and goggles when measuring nitrogen levels. The rate of evaporation and days between refills depends upon the storage conditions (temperature, drafts, sunlight), age and condition of tank and how often you open the tank. If the tank is covered with frost or condensation the vacuum could be damaged. If damaged, transfer the contents to another tank and remove the damaged one from service.

by: getMedOnline 0 Comments

Thursday, April 26, 2012

Bionet BM3 Plus Vital Signs Monitor
For those in the medical profession, saving lives is a sacred duty that must be upheld regardless of the difficulties that they may face. When conducting surgery, no matter how delicate in nature, a vital signs monitor is essential to ensuring the vitality of a patient. It acts as the relative line between safety and danger that they face. With the presence of a vital sign monitor it has become possible for surgeons and medical staff to measure the relative safety of a patient, without having to be on tenterhooks every time.

The Bionet vital signs monitor is a state of the art multi-parameter vital sign monitor that measures every aspect of the human vital signs. Everything from heart beat, respiration, blood pressure, and body temperature is measured with meticulous and unparalleled accuracy. The 8.4” High Resolution TFT screen makes this vital sign monitoring equipment a must-have for every medical facility. Made with a built-in printer and rechargeable battery pack, it is one of the best monitors of its kind available in the market today.

The specialized widescreen full-color display features unique colorations per vital sign, allowing for easy recognition even in the most pressing of situations. The built-in battery and 120 hours of recorded memory capacity allows for continuous use even in the event of a power outage, as well as hassle free recall of any possible data which may be needed for further analysis later on.

Bionet’s monitor even boasts a built-in printer which allows medical staff to easily retrieve information for analysis and documentation, with ease and convenience. This monitoring device is fully customizable to suit specific settings and is capable of retaining those settings even after being turned off. This state-of-the-art vital sign monitor is perfect for both adult and neonatal use, with a specialized enhanced data management, which allows for either continuous or spot-check usage.

It features a rechargeable battery pack that lasts for upwards of two hours, and the vital sign monitor is easily transportable and made for general use anytime, anywhere. The monitor includes an entire set of medical accoutrements that are useful for detecting a patient’s vital signs with great accuracy. The lightweight, precise, and durable vital sign monitor is perfect for any hospital or clinical outpost, as it is specially designed to be used on the go.

Bionet’s monitoring equipment wouldn’t be out of place even in simple clinics that require a reliable and accurate vital sign monitor – and with its capability for remote function, even rescue vehicles and ambulances can employ these monitors with confidence. If you’re looking for a reliable and dependable vital signs monitor that will come in handy in any situation, or if you’re looking for a top-notch monitor to use in professional applications, this monitor will provide you with years of excellent and dependable service.

by: getMedOnline 0 Comments

Saturday, April 21, 2012
Branson Ultrasonic Cleaners
Ever wonder how medical laboratories clean their sensitive equipment, or how jewelry shops clean their fine jewelry? This cleaning system is done by a single or dual ultrasonic cleaner, operating at a maximum temperature of 302 degrees.

An ultrasonic cleaner is a small or larger machine that is used in laboratory settings or home use. Applications of an ultrasonic cleaner are to give parts a high intensity cleaning. The Branson ultrasonic cleaner is gentle enough to clean fine jewelry. An ultrasonic cleaner accomplishes things such as cell lysing, it degasses liquids, leaches and extracts, is responsible for homogenization. Branson ultrasonic cleaners are the best on the market and are a very high efficiency product, so much so that with their two year warranty no consumer has to look any further for top quality cleaners. The quality cleaning power of this unit is faster and more consistent than others. This ultrasonic cleaner is a very safe unit to use. The quality of the Branson allows removal of heavy oils, and proteins. Laboratory equipment that is difficult to handle is given a quality cleaning along with any laboratory equipment.

There are many professional industries that need an ultrasonic cleaner, such as, industrial, science labs, medical and dental labs, optical professions, jewelry stores, the electronic industry, graphic arts, hearing specialists, and many more.

The way that an ultrasonic cleaner works is that it has sound waves that move due to ultrasound. The waves move through the cleaning solution to give what needs to be cleaned a deep cleaning. It removes contamination. The Branson scrubs surfaces clean with its high power and new sweep frequency. This particular cleaner has a timer switch that the operator can sit up to 60 minutes, or one can sit the timer switch for continuous cleaning. Branson has models that also have a heater built in that can be switched on as needed, and with its automatic heater shut off no one has to be afraid of overheating. One model is compact and specifically designed to clean jewelry and optical equipment. One will receive a 5 minute timer and parts basket, with this model.

One of the Branson ultrasonic cleaner has two operating frequencies, one for metal cleaning that is difficult and another setting for other sensitive applications. Heater can be used to supply a continuous temperature to liquid cleaners. The Branson heaters are guaranteed to run for years without problem. If a problem does occur then it does have the two year warranty and a very minimal repair time.

Each cleaner through the Branson Company has a specific list of accessories that are paired with each ultrasonic cleaner model.

The Branson ultrasonic cleaner have an extensive question and answer website that will touch on just about any questions one may have on ultrasonic cleaners, from what cleaning solutions to use and not to use. From ultrasonic cleaning to liquid processing one can find answers to their questions. If the answers are not found Branson has a top quality customer service department waiting to serve their customers.

by: getMedOnline 0 Comments

Friday, April 20, 2012

Centrifuges are an important piece of laboratory equipment that comes in various forms. The units are designed to spin blood and other specimens using high density spinning rotations. The purpose of these machines is to separate the samples into specific components. The concept involves the idea of denser material falling away from matter that is less dense. Important lab results are achieved by the use of these devices. Physicians, veterinarians and other healthcare professionals depend on the accurate readings provided by these machines. The results can help healthcare practitioners determine a diagnosis. This is crucial information to obtain before deciding on a treatment plan.

All labs will generally use hematocrit centrifuges in their testing. This separates the blood cells down into their individual components. A low hematrocrit reading can mean that someone is losing blood. It is also indicative of various disease processes. These machines can usually accept many different specimens at the same time. Lab professionals are usually able to see the results occurring during the spinning process. This can mean faster results, and these types of machines are ideal for hospitals and other operations that must process many samples. There are several different varieties of these devices on the market.

Most larger lab set ups make use of a test tube centrifuge. There are different models, and the tubes can be plastic or glass. Each has its own pros and cons. Glass test tubes can be sterilized by a process known as autoclaving. This is a good option for places that perform many tests on different patients. The plastic tubes are harder to clean, and they take some special care. Some of the plastic versions are disposable making them extremely sanitary. The size and location of the lab will help to determine which unit is the best choice for their specific needs.

There are some instances where a portable centrifuge is the most cost effective option. Spaces that are limited in size are ideal candidates for this form of centrifuge. There are different versions and styles that can be purchased. Each one has its own unique features. These easy to transport units are fantastic for home health care workers. Other practices such as veterinarian clinics also benefit from these smaller models. Disaster relief teams often make use of these products. They are beneficial to workers out in the field. The costs can vary depending on the size and special options.

Choosing a centrifuge can be challenging. A facility or healthcare practitioner wants to ensure that they select the best model to meet their specific requirements. The three main choices are hematocrit centrifuges, a test tube centrifuge or a portable centrifuge. Some of these models can be quite expensive. It is important to investigate all of the options and features available with each device. Then decisions have to be made based on allotted budgeting costs. The different units should be looked at for space requirements, location, necessary features and ease of transport. The choice of centrifuges is critically important.

by: getMedOnline 0 Comments

Friday, April 13, 2012
Brymill is introducing the New CryAc TrackerCam. Brymill CryAc TrackerCam is a 10Oz Portable handheld Cryogenic Sprayer that comes with an infrared temperature sensor technology combined with a built-in HD camera. The sensor and the built-in HD camera allows the user to record the entire procedure as well as the freeze time and temperature on an SD card loaded in the Tracker Cam. You can purchase the Brymill CryAc TrackerCam at with a full factory warranty. is an Authorized distributor for all Brymill Cryogenic Systems where you can purchase them confidently.

  • More precision, control and patient data!
  • With its revolutionary new infrared sensors and built-in camera, you can:
    • Get a clear, precise view of the lesion area
    • Program applications by skin temperature and freeze time for better control
    • Record video and audio of treatments and collect patient data for EMR files

    Brymill, the industry leader in Cryosurgery, has taken the next leap into technology by introducing the new Tracker Cam. You can now record the entire procedure as well as the freeze time and temperature on an SD card loaded in the Tracker Cam.

    by: getMedOnline 0 Comments

    Friday, April 6, 2012 Blog: Branson Sonifier analog or Digital Cell Disruptors...: We carry the whole line of Branson Sonifiers Parts and Accessories at PLACE YOUR ORDER, HERE Our Sonifier® cell disrupt...

    by: getMedOnline 0 Comments

    Brymill has been the world’s leading manufacturer of handheld, liquid nitrogen (LN2) cryosurgical and cryospray devices since 1966. With patented design features, Brymill’s CRY-AC® and CRY-AC®-3 handheld cryo units offer unsurpassed safety, versatility, and control for precise and effective medical and veterinary cryosurgery as well as industrial applications of liquid nitrogen (such as in the testing and repair of printed circuit boards). Liquid nitrogen cryosurgery with a cryogun is the coldest (-196º C), most effective, and most versatile cryosurgical technique available. LN2 applied with a cryogun is much colder and therefore more effective than LN2 applied with a swab (-20º C), nitrous oxide (-75º C), and disposable cold sprays (-55º C to -70º C). Also, Brymill has a MUCH lower cost to use on an ongoing basis than disposable cold sprays because it is not necessary to repeatedly buy $150-$200 disposable cans, each of which only can treat approximately 25-65 lesions.
    CRYAC® and CRY-AC®-3 devices are used to treat a wide range of common skin lesions, including Verruca (warts), Actinic Keratoses, Seborrheic Keratoses, Molluscum, Papilloma (skin tags), Lentigines (age spots), Condyloma (genital warts), and Basal Cell Carcinoma (skin cancer). Brymill offers the largest, most comprehensive selection of cryospray equipment and accessories available. For more information, see Cryosurgery/Cryotherapy FAQs , Why Choose Brymill? , Features & Benefits of CRYAC ®, Product Catalog Veterinary Units , and Industrial Units .

    by: getMedOnline 0 Comments

    Branson has been a world leader in the development of ultrasonic precision cleaning equipment for over 60 years. We offer cleaning systems in sizes ranging from a bench-top to industrial sized and we employ the latest technology in aqueous cleaning, semi-aqueous cleaning, and vapor degreasing. Our global presence insures that you will be able to find the products and services you need, wherever you are! Whether you are looking for a full solvent or aqueous system or custom systems and components – Branson offers the perfect solution for every application!
    Bransonic & Benchtop Cleaners Bransonic & Benchtop cleaning technologies include our line of Bransonic cleaners Industrial Ultrasonic Cleaning Industrial Ultrasonic cleaning systems including Sovlent Systems, Degreasers, Aqueous Systems, Custom Systems and components Cleaning Solutions Branson offers a complete line of cleaning chemistries for many applications and most are concentrated and offered in quarts, gallons, 5 gallon pails and 55 gallon drums Cleaning Literature Collection point for all cleaning literature. CLICK HERE TO PLACE YOUR ORDER FOR BRANSON ULTRASONIC CLEANERS, PARTS, ACCESSORIES AND CLEANING SOLUTIONS

    by: getMedOnline 1 Comments

    We carry the whole line of Branson Sonifiers Parts and Accessories at PLACE YOUR ORDER, HERE Our Sonifier® cell disrupter / homogenizer line has been consistently used as the benchmark in laboratory experiments and research studies for nearly 30 years. Technicians find it invaluable for degassing liquids, accelerating chemical reactions, preparing liposome’s, and performing genome research.
    The Sonifier® ultrasonic cell disruptors are versatile laboratory tools designed to apply high-frequency ultrasonic energy to biological and chemical processing to: Cell disruption Nano particles Chip assay Emulsifications Homogenization Cell Lysis Processing DNA & Proteins Acceleration of reactions Leaching & extraction Fine mixing Degassing

    by: getMedOnline 0 Comments

    The LW Scientific ZIPOCRIT portable hematocrit centrifuge is on sale for $221.95 for a limited time. Quick same day shipping at PLACE YOUR ORDER, HERE LW Scientific 4x75mm Portable Hematocrit Centrifuge w/11000 rpm, ZIPocrit The ZIPocrit centrifuge spins 4 75mm capillary tubes at 11,000 rpms. Designed for cell separations, microfiltration, and DNA preparations.
    Ideal for mobile labs and small practices Spins 4 x 75mm capillary tube at 11,000 rpm Designed for cell separations, micro-filtration, and DNA preparation

    by: getMedOnline 0 Comments